Welltech LP-803 v.3.07 - Manual (Page 50)

LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
50 / 90 2014/07/22
DMZ Active Defualt: Disable; When you Enable this function, all the incoming
packages will transfer to the assigned IP address.
Provide options: Disable, Enable.
DMZ IP Address Default: 0.0.0.0.
The assigned IP address type is xxx.xxx.xxx.xxx of maximum 15
bytes.
MAC Clone Active Default: Disable; When you Enable this function, LP803 will provide
MAC ID Clone of PC through LAN Port.
Provide options: Disable, Enable.
Note:
1. MAC Clone function: Must use “Device Active” to Setup “Router”
mode, then enable to get IP address automatically.
2. Connect PC to LAN port of LP803, After PC get the IP address and
use LAN port login web page. Be able to Setup this function to
configure.
Submit [Button] Save the Settings.
2.7.2.3. Special Considerations
If MAC Clone want to retrieve LP803 originally MAC address, Please reset to default Setting
(Restore Default Setting).
2.7.3. Virtual Server
2.7.3.1. Functions
Virtual Server Provides 12 sets of Virtual Server information.
2.7.3.2. Instruction
Item Explanation
Index Show the number.
Active Default: Not use.
If you select it, the setup will be started.
Protocol Default: TCP.
Select the Protocol: TCP or UDP.
Internet Port Show the address of Internet Port.
Setup the Internet Port address of Start and End.