Welltech LP-803 v.3.07 - Manual (Page 33)

LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
33 / 90 2014/07/22
Instruction 1: When dialing number is [#87] , meet [Rule] field #87 rules. Stop to receive
number immediately. Delete 2 numbers (#8). Then add prefix number [0427121234]
before [7], Actually sending number is [0427121234+7].
2.5.5. Call Service (Phone Feature)
2.5.5.1. Functions
Provide Forward (Transfer), Hotline, DND (Do Not Disturb) and Alarm.
2.5.5.2. Instruction
Figure 1: LP803 Device
(Figure 1)
Item Explanation
Forward Type Default: Disable.
Provide option: Disable, All, Busy, No Answer, Busy or No Answer.
*Please check the Forward function supported by IP-PBX or SIP Server.
Forward Number These columns can enter numbers or strings. Maximum length is 63
bytes.
Rings Default: 3 Rings. When ringing 3 ring cycles and no one answers. It
was regarded as no one answers the call.
Provide option 2~8 Rings.
This function only support No Answer or Busy functions.
Hotline Type Default: Disable. When Setting Enable, once pick up the phone, it dials
the pre-defined phone number automatically.
Hotline Number Setup Hotline Number, it can be numbers or address.
This column can enter numbers or string. Maximum length is 63 bytes.
For Example, IP address: 192.168.1.23, or phone number:
0800024365.
Delay Default time is 3 seconds. When picking up the phone handset, LP803
dials the Hotline Number automatically after delay predefined seconds
was expired.
Provide option 0~6 seconds.
DND Type Default: Disable.
DND Setting allows denying all incoming calls (
SIP Status: 486 Busy