Welltech LP-803 v.3.07 - Manual (Page 70)

LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
70 / 90 2014/07/22
Step 4: In [Service Domain Setting] web page, Check [Realm: 1] Settings, Use [MACID.dat] file
to load configuration (See Figure 7).
(Figure 7)
Example 4： Server Auto Discover

Broadcasting
Step 1: In [Auto Provision Setting] web page, Set up [Provision Active: TFTP, Server Auto
Discover: Broadcasting] (See Figure 8).
(Figure 8)
Step 2: In [Auto Provision Setting] web page, Check [Provision Active: TFTP, TFTP Server:
192.168.55.91, TFTP File Path: config/] (See Figure 9).
Note：If starts TFTP Server at the same time, this field parameter can’t see data. Because of this
data upload provision function by TFTP Server.
(Figure 9)
Step 3: Enter [Service Domain Setting] web page, check [Realm No.: 1] Settings, Use
[MACID.dat] file to load configuration.
 DHCP Option 66 (TFTP) (Please refer to DHCP Turbo and TFTP Turbo documents)
Step 1: Install [DHCP Turbo + TFTPd32] software, then placed [MACID.dat] file into the specified
directory.
Step 2: In [Auto Provision Setting] web page, Set up [Provision Active: TFTP, Server Auto
Discover: DHCP Option 66 (TFTP)] (See Figure 10).