Welltech LP-803 v.3.07 - Manual (Page 74)

LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
74 / 90 2014/07/22
Item Explanation
bytes.
FTP User Name This column can enter IP or Domain Name; maximum length is 63
bytes.
FTP Password This column can enter IP or Domain Name; maximum length is 63
bytes.
File File Path This column can enter numbers or strings; maximum length is 63
bytes with the “/” in the end, ex: 123/.
Check new
Firmware Type
Default: Scheduling Only.
Set up the type for checking new firmware.
- Power on and Scheduling: Check the new firmware when powers on
and base on Scheduling
- Scheduling: According to [Next Update Time] to check the new
firmware.
Provide options: Power on and Schedule, Scheduling Only.
* Power on and Scheduling: When LP803 discovers a new firmware
which is different with current one, it will not update immediately. But
you will hear a hint tone or see a [Found new s/w] message on LCD.
You should update firmware by your decision.
Scheduling (Date) Default: 14 (day).
This column can only enter numbers; maximum length is 2 bytes with
a range of 1~30.
Scheduling (Time) Default: AM 00:00 – 05:59.
Provide options: AM 00:00 – 05:59, AM 06:00 – 11:59, AM 12:00 –
17:59, AM 18:00 – 23:59.
Automatic Update
Type Default: Notify only.
Set up the type to update firmware.
Provide option: Notify only, Automatic.
- Notify only: When LP803 discover a new firmware, it will not update
firmware immediately. But you will hear a hint tone from LP803 or see
a [Found new s/w] message on LCD display.
- Automatic: Update firmware automatically.
Firmware File
Prefix Default is production model.
This is used to judge which model ask for update, such as Phone or
ATA.
This column can enter numbers or strings; maximum length is 8 bytes.
Next Update Time LP803 will check the Update Server when the Next Update time is up.
The start counting date is the next day, so the Next Update time will
add one day.
Count rule： the next day + days + time period + MACaddress +
random number = Next Update time.
Submit [Button] Save the Settings.
Note: Update By Youself
Step 1: Display [Found new s/w] message on LCD display of LP803.
Step 2: Press the [MENU] key to enter menu, select [6. Administrator 2. Upgrade System1.
Upgrade Now 1. Yes] , then LP803 will update firmware automatically.
Special Note：When LP803 IP Phone starts to upgrade firmware, it takes several minutes to
upgrade (about 2~3 minutes). In this duration, it can not dial any call feature.
Don’t remove electric power in upgraded duration. Otherwise, the flash memory
may be damaged permanatly and can not be recovered.
2.9.3.3.
Operate Instruction
Example 1: Build an Auto Update File [***_ver.dat]