Welltech LP-803 v.3.07 User Manual
Page 48
LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
48 / 90
2014/07/22
2.7. NAT (NAT Environment)
Provide function of [LAN, DMZ & MAC Clone, Virtual Server].
2.7.1. LAN (LAN Network Setting)
2.7.1.1. Functions
LAN Provides functions including DHCP Server.
2.7.1.2. Instruction
Item Explanation
Device Active
Default: NAT.
Setup the routing function of LAN Port.
Provide options: Bridge, NAT.
Bridge: When you Setup Bridge, [WAN & LAN] Port are all in the same
IP domain, just like in the same network switch.
NAT: When you Setup NAT, [WAN & LAN] Port are in the different IP
domain. LAN Port work as DHCP server when you Enable DHCP Server
Active function.
LAN IP Address
Default: 192.168.123.1.
The type is xxx.xxx.xxx.xxx of 15 bytes.
LAN MAC Address
Show LAN MAD ID address.
Enable DHCP
Server
Default: Enable; When you Disable this function, LAN Port will not be a
DHCP Server.
Provide options: Enable, Disable.
IP Address
Default: 150~200; Setup the IP address range of DHCP Server. This
column can only be numbers; maximum length is 3 bytes with the
range of 1~254.
Lease Time
Default is 1440 (min), IP address rented deadline. Only use number,
Data setting range is 10~17820, maximum length is 5 bytes.
Submit [Button]
Save the Settings.
Index
Shows the serial number.