Welltech LP-803 v.3.07 - Manual (Page 14)

LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
14 / 90 2014/07/22
First Layer Secondsond
Layer
Third Layer Fourth Layer Explanation
configuration
4.System
Authent
Set up system
permissions
5.Version Device version
information
6.LCD
Language
1.English LCD English
interface
2.Portugal LCD Portugal
interface
7.Restart Restart device
8.Auto Reboot 1. Enable Enable auto
reboot feature
2. Disable Disable auto
reboot feature
*Admin Use: Enter LCD menu 6.Administrator > 4.System Authent, Then use the LP803
administrator’s password to login. After login, You can enter this option and modify
settings.
1.6.2. Dial function Introduction
1.6.2.1. LP803 Dial Feature
That is on ways to dial number：
1. Press “Talk” key, After dial number direct, press “#” key to dial out immediately.
2. Press “Talk” key. Enter phone number and wait for 3 seconds to dial out automatically.
(Default)
3. In ON-Hook state, Dial number and use C key to modify wrong number. After checking
correct number, press # key to dial out.
Example:
 Dial other extension number at the same proxy server, for instance, 1008. Just pick up the
phone and dial number 1008, than press “#” key or wait 3 seconds to dial out.
 Dial a PSTN number, ex. 0800024365, maybe need to add prefix code before the phone
number.
Remark:
 In the LP803 web management system “Phone” -> “Dial Plan - Basic” web page, check
[Dial Plan - Basic] page parameter [Key As Send #], the Settings is Enable or not.
1.6.2.2. Point-to-Point(P2P) Dial Feature
Two LP803 IP-Phone devices can call directly without SIP proxy server registration mode.
Environmental requirements:

Both LP803 IP-Phone device need to use physical static network IP address ; or at the same
private LAN network environment, or in a same VPN network.
Example:
 If the called LP803 IP address is 192.168.0.160, dial number as follows:
Pick up the phone, dial “192*168*0*160”, then press “#” or wait 3 seconds to finish the
P2P call.
 If the called LP803 IP address is 192.168.1.20 and port is 5062, dial number as follows:
Pick up the phone, dial “192*168*1*20**5062”, then press “#” or wait 3 seconds to finish
the P2P call.