Sat settings – Wavecom W61PC V7.5.0 User Manual

Page 46

 First start

WAVECOM Decoder W61PC/LAN Manual V7.5

Pressing Change Order will reverse the polarity of the signal and pressing Default ST will restore the de-
fault value.

By right-clicking on the display a menu appears.

SAT Settings…

For the SAT Modes, additional parameters can be set in the Options | SAT Settings dialog box.

These settings are:



Service: Select the service to monitor. Choose between:

FAX/DATA/TEL/HSD/TELX_SM/TELX_MM. There are two different possibilities for monitoring
telex:

This manual is related to the following products: