Wavecom W61PC V7.5.0 - Manual (Page 300)

290  Additional Functions WAVECOM Decoder W61PC/LAN Manual V7.5
If the server is stopped, you CANNOT restart it using Restart. You must click Exit, and then go to Start |
Programs | WAVECOM | WXXX | WavecomServerControl to restart the server.
WAVECOM Server Control
After restart of the server, the WAVECOM Server Control screen is displayed.
Card Information
Card information is available from the Card Information tab:
 Card names
 Number of connections to the card, including local and remote connections
 Device name
 Card serial number
Setting Up Card Names
A maximum of eight cards may be connected to a single computer. Each of these cards has a name asso-
ciated with it; the card names can be used to establish a connection to a specific card. The default names
are "DeviceA" through to "DeviceH". It is possible to change the card names by:
 Clicking into the name edit field
 Change the name of the card
 Click on the Apply Changes button. Discard Changes will discard any changes