Wavecom W61PC V7.5.0 - Manual (Page 36)

26  First start WAVECOM Decoder W61PC/LAN Manual V7.5
VHF/UHF-DIR | Analysis VHF/UHF-DIR | Modes
VHF/UHF-DIR | Mode Selector...
See “ Mode Selector ” on page 61.
VHF/UHF-SUB Menu
INDIRECT modes require additional AM or FM demodulation in the receiver. If the signal is demodulated
from an IF-IQ signal (offset frequency <> 0), then a standard AM or FM software demodulator is automat-
ically added to the signal processing path.
The various VHF/UHF-SUB protocols are displayed in the VHF/UHF-SUB menu. To start decoding of the
desired mode, click on it.
The various analysis tools are displayed in the Analysis menus.
The descriptions of the operating modes in a separate section of this manual are arranged in alphabetical
order.
The Mode Selector is available from the VHF/UHF-DIR menu and from the WAVECOM Toolbar.
VHF/UHF-SUB | Analysis VHF/UHF-SUB | Modes