Wavecom W61PC V7.5.0 - Manual (Page 306)

296  Additional Functions WAVECOM Decoder W61PC/LAN Manual V7.5
Proceed as follows:
 Enter a phone number for the message to be forwarded to
 Check the Enable SMS box to enable the forwarding
 Set the SMS time delay (1..59 minutes)
 Select a folder where to store the SMS files using the browse button on the right
Note: To forward the SMS message files created using these settings requires a third party product.
Run
This menu allows you to start and stop the monitoring of the Alarm Monitor. After connecting to a card,
you must press the Start menu item to begin monitoring. Before you can select a new card, you must
stop Alarm Monitor using the Stop menu item.
When Alarm Monitor is active, this will be indicated in the title bar with the message Running...
Use the scrollbar to see the whole text line.
Note: The display will only allow the user to look back over the last 1000 lines of text.
Serial Link
Introduction
Serial Link is an integral component of the decoder software. Although it is a separate application, it is on-
ly useful when used in conjunction with the WAVECOM decoder software. Serial Link can send all data
from text modes of eight decoder cards to eight different COM ports. Each COM port can be configured.