Vuzix maxReality 6.1 User Guide - Manual (Page 38)

Hardware Configuration Keys
Key Action Mode
F2 Reset all hardware configuration settings AR + VR
F3 Toggle rendering scene 2-seconds timeout with no detected patterns AR
F4 Toggle mono mode on / off AR + VR
If you are unsure if you are looking at a 2D or 3D image, look at your desktop
monitor. If you are in 2D display mode, you’ll see only a single image on your
desktop monitor. If you are looking art a 3D image, your desktop monitor will be
split into two side-by-side images.
F5 Toggle black background vs. outside camera view AR
Using a black background allows you to remove the background clutter from
scenes.
A black background has the disadvantage of blocking out the video captured by
the cameras.
F6 Flip camera image horizontally AR
F7 Flip camera image vertically AR
F8 Toggle learning pattern relationships off/on AR
Pattern learning is enabled by default
F9 Reset learned pattern relationships AR
F10 Toggle control of cameras auto-exposure override settings AR
F11 Reset camera image offset settings to zero AR
F12 Open configuration panel AR
Left Arrow Decrease camera exposure time AR
Right Arrow Increase camera exposure time AR
Shift + Up Arrow Shift camera offset alignment up AR
Shift + Down Arrow Shift camera offset alignment down AR
Insert Zoom in cameras image AR
Delete Zoom out cameras image AR
Control + D Enable / disable maxReality.log file generation AR + VR