Vuzix maxReality 6.1 User Guide - Manual (Page 24)

Add Key Object
Key Objects trigger the movement from one VWD to another. Each must be
assigned a destination VWD and an Entry Camera and all must be based on a
common unit scale.
To create a Portal Key Object:
 Selecting the desired object from one of your Viewports.
 Press the “Add Objects” button.
To delete a Key Object, select the desired object from the Key Objects list and press
the “del” button.
Range
Range defines a trigger range or zone around a Key Object
Select VWD
Each Portal must have a destination. The destination will commonly be another
VWD but it can also be the same VWD being entered through a different Entry
Camera.
A Key Object must be selected before you can assign a destination VWD and the
destination VWD must pre-exist and contain at least one camera in order to be
selected as a portal.
To select a destination VWD:
 Press the “Select VWD” button.
 Browse to and select the desired destination VWD.

Press the “Open” button.
Entry Camera
When a destination VWD is selected, all of its available cameras will be displayed in
the “Entry Camera” drop list. Select the Entry Camera through which you wish to
enter the Portal.