Visara 1486 - Manual (Page 77)

4-16 701334-002
Operating Procedures
The operator status row looks like this:
Figure 4-6. Operator Status Row After Play Key
3) Press the Function key under which the sequence is stored. The P is no longer
displayed when playback is completed. Once initiated, playback cannot be stopped,
and additional keystrokes are not accepted until playback is completed.
Playback Mode Reminders
The following keys are useful during Playback mode:
• Play key – When playback stops at a recorded pause sequence, you can key in any
words or sentences, then press the Play key to continue the playback action. See Page
4-15 for a description of the appropriate Play key for the keyboard.
• Quit key – Press the Quit key during the playback operation to cancel the playback
sequence. See Page 4-15 for a description of the appropriate Quit key for the keyboard.
Note: If a 4-digit error code is displayed on the operator status row during Playback
mode, refer to Appendix A, “Four-Digit Error Codes.”
Record/Playback Security Mode
When you enable this option, you cannot use the alphanumeric keys on the keyboard to
record data, If you try, the 1486A/G/P automatically exits from Record/Playback mode.
It also prevents you from playing back data recorded in the Command or Function keys.
If you press a Function key, the display station exits from Record/ Playback mode.
See “Setting the Record/Playback Security Mode” on Page 3-34 for instructions on
enabling Record/Playback Security mode.
Play
Function Keys To
Which Keystrokes Have
Been Assigned