Visara 1486 - Manual (Page 11)

701334-002 1-3
Introduction
• Security Keylock – Blanks the screen and inhibits access from the keyboard. The
operator status row remains displayed.
• Audible Alarm – Sounds when the host system signals the display station.
• Tilt/Rotate Stand – Enables the display/logic element to be tilted over 20 degrees of
arc and rotated a full 160 degrees for viewing ease.
• Row/Column Indicator – Provides display of the cursor location with respect to the
upper left corner of the screen. Numbers indicating the cursor row and column position
are displayed on the operator status row.
• Dual Display Sessions – Allows the 1486A/G/P to operate with two display station
addresses. You can use the Jump key to toggle between sessions. See “Dual Display
Mode” on Page 4-2.
• Split Screen – Allows for the simultaneous display of two display station sessions on
one screen. See “Dual Display Mode” on Page 4-2.
• Local Screen Print Function – Allows you to make a hard copy of the screen contents
without using system resources. The local screen print feature can be used only on
display stations not configured for host addressable print sessions.
• Print Trim Function – Allows you to print only a selected portion of the screen
when making a local screen print.
• Rule Cursor – Enables you to select either a vertical (|), horizontal (-), or horizontal/
vertical (+) cursor.
• MVP (Multivendor printers) – The 1486A/G/P supports a wide variety of industry
standard printers.
Optional Features
• Lift Arm – An optional lift arm is available that attaches to the display. With the lift
arm, the display’s height can be adjusted from the lowest position of 4.85 inches
(12.32 cm) to the extended position of 12.10 inches (30.73 cm). The display can be
tilted over 20 degrees of arc and can be rotated a full 180 degrees for viewing ease.
The lift arm has a base footprint of 12.66 inches (32.16 cm) by 10 inches (25.40 cm)
and weighs 10 pounds (4.53 kg). To purchase the lift arm, see your MTX Customer
Representative.
• Magnetic Stripe Reader – The 1486A/G/P can support a magnetic stripe reader that
attaches between the keyboard and the display station. The magnetic stripe reader
should supply its own power.
Warning
Do not pick up the Display element if the lift arm is attached to it. The lift arm
could separate from the Display element and injure you.