beautypg.com

Installing the tilt/rotate stand, Figure 2-2. installing the tilt/rotate stand, Installing – Visara 1486 User Manual

Page 18: Setting up the display station -7, Figure 2-2, Installing the tilt/rotate stand -6

background image

2-6

701334-002

Customer Installation

Installing the Tilt/Rotate Stand

1) Turn the Display/Logic element face down with the bottom facing you.

2) Insert the four tabs on the Tilt/Rotate stand into the slots on the bottom of the Display/

Logic element and slide the Tilt/Rotate stand up until it locks into place in the slots
(see Figure 2-2, below).

3) Turn the Display/Logic element with the installed Tilt/Rotate stand upright.

Figure 2-2. Installing the Tilt/Rotate Stand

See also other documents in the category Visara Computer Accessories: