Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 91)

W e b S e r v e r I n t e r f a c e 3-61
Figure 3.48 Route Details Screen
Endpoint Endpoint name (or interface) through which to send the IP packet to reach the
Target IP Address.
Target IP Address Represents the target network that you want this router to reach.
Values: 0.0.0.0
−
255.255.255.255
Default: 0.0.0.0
Target IP Mask Mask of the target network.
Values: 0.0.0.0
−
255.255.255.255
Default: 0.0.0.0
NOTICE: Setting the Target IP Address and Target IP Mask to 0.0.0.0 defines
THE default route for this unit.
Next Hop IP Address: IP address of the next device in the route.
Cost Cost of using that route.
Values: 0
−
65535
Default: 1
Route Status Indicates whether or not the current route is enabled.
Values: Enable, Disable
Default: Enable
The Route Details screen provides the following user-activated buttons:
Button Function
Submit Sets any values that have been changed.
Static Route Table Returns you to the previous screen.
Delete Route Deletes the route currently displayed.
Refresh Refreshes data on the current page.