Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 110)

3-80 W A N s u i t e 5 2 6 0 / 5 2 3 0
Host Name Name given to the DHCP client.
The Static Entries screen provides the following user-activated buttons:
IP Address List Screen
The IP Address List screen (Figure 3.4) displays the “pool” of addresses
available for DHCP clients. These parameters are configured on the IP
Address List Details screen accessed by clicking on an “Index” number.
Figure 3.71 IP Address List
Start Starting IP Address of the DHCP client pool.
End Ending IP Address of the DHCP client pool.
Subnet Mask Subnet Mask associated with the defined range.
Exclude Start Beginning of “excluded” range.
Exclude End End of “excluded” range.
The IP Address List screen provides the following user-activated buttons:
IP Address Status Screen
The IP Address Status screen (Figure 3.72) displays a list of all current DHCP
clients.
Button Function
DHCP
Details Returns the user to the previous screen.
Add New Lets the user add an additional Static Entry.
Refresh Refreshes data on the current page.
Button Function
DHCP
Details Returns the user to the previous screen.
Add New Lets the user add an additional IP address.
Refresh Refreshes data on the current page.