Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 20)

1-6 W A N s u i t e 5 2 6 0 / 5 2 3 0
• IP Gateway:
• Frame Relay or PPP
• 10/100Base-T Ethernet port
• Static routes
• Static Address Resolution Protocol (ARP)
• Dynamic routing protocols, including RIP 1, RIP 2, and OSPF
• Un-numbered Network
• Address Management: NAT and DHCP
• Programmable alarm thresholds
•
Configurable Serial Port(s):
• Supports V.35, EIA-530, RS-232, and X.21
• Supervisory Control and Data Acquisition (SCADA):
• TCP Server allows multiple connections to TCP clients
• Asynchronous multicasting lets the WANsuite 5260/5230 transmit
identical data to multiple endpoints
• A Suite of Performance Monitoring Tools
• Monitoring capability for up to 256 virtual circuits (Data Link Connection
Identifiers, or DLCIs)
• E1/FE1 performance monitoring, including complete diagnostic
capabilities and test modes
• SLA monitoring and management
• Committed Information Rate (CIR) enforcement per DLCI
• Programmable alarm thresholds
• Management Interfaces:
• WANsight
−
an innovative, embedded Web-based user interface for
remote configuration and real-time reporting via Web browser
(Verilink recommends Microsoft Internet Explorer 5.0 or higher) that
decreases installation and configuration time for service employees,
simplifies troubleshooting and fault isolation of network problems, and
optimizes management of both TDM and frame-based services
• VT100 or TELNET
• Local Supervisory port
• Ethernet port for management or IP routing
• LCD
•
Frame Relay Aware:
• Supports leased-line and frame relay services
• Layer 2 end-to-end visibility and control
• Embedded frame relay test set