Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 121)

V T 1 0 0 I n t e r f a c e 4-5
The System screen displays the user-selectable prompts listed below.
Maintenance Reset
Select this prompt to access a screen (Figure 4.4) where you can reset your
unit to factory defaults (Packet or TDM).
Figure 4.4 Maintenance Reset Screen
Using the space bar, you may toggle through the options to select the desired
maintenance reset (Default TDM Configuration, Default Packet Configuration,
Default Packet 3 Configuration, or Default Packet 4 Configuration). After you
select an option, the unit will display a confirmation screen (Figure 4.5) where
you may choose either to proceed with the maintenance reset or not.
Prompt Function
Maintenance Reset Displays a screen that lets you reset the unit to its default tdm,
Packet, Packet 3, or Packet 4 configuration.
Save and Restart Saves the current configuration and restarts.