Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 224)

A-6 W A N s u i t e 5 2 6 0 / 5 2 3 0
Ordering Information
Each WANsuite 5260/5230 unit ships with the following standard equipment:
Optional Equipment
The following optional equipment is available for use with the WANsuite
5260/5230:
For further information, contact Verilink Technical Support (page xii).
Description
E1 Network Cable (RJ-48 to RJ-48)
AC or DC Power Supply
Cord for Power Supply
Serial (SUPV) Cable (DB9 male
−
DB9 female)
Verilink Documentation CD
Description
Serial (DCE) Cable (DB25–DB25, M/M, pin/pin) (EIA530/RS232), 6 ft
Serial (DCE) Cable (DB25–Winchester 34-pin (V.35) M/M, pin/pin), 5 ft
Serial (DCE) Cable (DB25–Winchester 34-pin (V.35) M/M, pin/pin), 10 ft
Serial (DCE) Cable (DB25–V.35, M/F, pin/pin), 5 ft
Serial (DTE) Cable (DB25–DB25, M/M, crossed), 6 ft
Serial (DTE) Cable (DB25–V.35, M/M, crossed), 5 ft
X.21 Cable (DB25/DB15–X.21, M/M), 2 ft
Serial (DCE) Cable (DB25-Cisco DB60)
Rack Mount, 19-in., for Single Stand-alone Unit
Rack Mount, 23-in., for Single Stand-alone Unit