Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 128)

4-12 W A N s u i t e 5 2 6 0 / 5 2 3 0
Figure 4.10 Performance 30 Day Screen
Serial Screens
The WANsuite 5260 Serial 1 and Serial 2 screens or Serial screen on the
WANsuite 5230 let you view and make changes to the unit’s Serial interface
configuration as described in the paragraphs below. The parameters are the
same on all Serial screens, except for the Invert Clock parameter, which is
shown only on the Serial 2 screen (Figure 4.11). To make changes to any
Serial parameter, simply set the parameter to the desired selection and press
the “Esc” key.
Figure 4.11 Serial Screen
Type This parameter selects the type of interface (based on its electrical signal
characteristics) used by the equipment connected to the Serial port.
Values: V.35, RS-232, EIA-530, X.21
Default: V.35