Teac SS-CDR200 - Manual (Page 56)

56
TASCAM SS-CDR200/SS-R200/SS-R100
When working with CDs that have audio CD format files,
you can use the audio CD
FINDER
screen to select tracks
for playback. In addition, when working with unfinalized
CD-R/CD-RW discs that have audio CD format files, you
can also edit the CD-Text.
The following explanations assume that an audio CD is
inserted and
CD
is selected as the current device.
Opening the audio CD FINDER screen
When stopped, in playback standby or playing back, press
the FINDER [A-B] button (or remote control FINDER
button) to open the audio CD
FINDER
screen.
This screen shows the tracks in numerical order.
If you open this screen while stopped, track 1 will be
selected.
When in playback standby or during playback, the current
track will be selected.
To close the FINDER screen and return to the Home
Screen:
Press the HOME/DISP button (or remote control HOME/
DISP button).
Selecting a track to play
Follow these procedures on the audio CD
FINDER
screen
to play back a track.
1 Open the
FINDER
screen, and select the track to
playback.
2 Press the PLAY button (or remote control PLAY
button)
When stopped, doing this will start playback of the
selected track.
When in playback standby, doing this will start
playback standby at the beginning of the selected
track.
Editing CD-Text (CD-R/CD-RW disc
only)
If you insert an unfinalized CD-R/CD-RW disc that has
audio CD format files, you can follow these procedures to
edit the CD-Text.
1 Open the
FINDER
screen, and select the desired
track.
2 Press the MULTI JOG dial (or remote control ENTER
button) to open the CD-Text editing screen for the
selected track.
3 Edit the text. Follow the instructions in “Inputting
and editing characters” on page 48.
4 After you finish editing the CD-Text, press the
MULTI JOG dial (or remote control ENTER button)
to confirm the changes.
After the CD-Text has been changed, the
FINDER
screen reopens.
CAUTION
• If you press the EJECT button, the following warning
message pop-up will appear.
Finalize the disc in order to save the CD-TEXT. (See
“Finalizing CD-R/CD-RW discs (SS-CDR200 only)” on
page 53.)
NOTE
• Names that contain characters other than the letters of
the alphabet, numbers and symbols cannot be edited
(the name will not appear when the
RENAME
function is
being used).
• The following symbols and punctuation marks cannot
be used in names.
\ / ; : * , ? “ < > |
7 – Audio CD FINDER screen (SS-CDR200 only)