Teac SS-CDR200 - Manual (Page 39)

TASCAM SS-CDR200/SS-R200/SS-R100
39
NOTE
• If the playback mode is set to RANDOM
and you press
the remote control FLASH LOAD button, a
CAN'T
SELECT
warning message pop-up will appear, and the
data will not be read.
• If the playback mode is set to SINGLE
and you press
the remote control FLASH LOAD button, the tracks in
the play area will be read successively in the same way
as for the
CONTINUE
setting.
• If twenty-one or more tracks are registered, data for the
first twenty tracks from the beginning will be loaded.
4 When
FLASH
appears on the Home Screen, you can
trigger flash-start playback from a PS/2 or USB
keyboard connected to the front panel or from an
external device connected to the parallel connector
(SS-CDR200/SS-R200 only).
If you are using a PS/2 or USB keyboard, you can press
CTRL and a function key (F1–F12) to flash-start tracks
1–12 (see “Keyboard operation list” on page 73.).
If you are using the external parallel connector, you
will be able to flash-start tracks 1–20 (See “Using the
parallel connector” on page 75.)
NOTE
Tracks to be flash started must have the same sampling
frequencies. If a track with a different sampling frequency
is detected while loading the tracks,
-- error --
and
FLASH LOAD
appear on the display, and the unit will
cancel track loading.
TIP
By setting the play area to
PLAYLIST
and selecting a
playlist that contains only the tracks that you want to
flash-start as the current playlist, you can efficiently use
the flash start setting for the desired tracks (see “Play area”
on page 28 and “Editing the playlist (USB/SD/CF media
only)” on page 60).
4 − Preparations