Teac SS-CDR200 - Manual (Page 21)

TASCAM SS-CDR200/SS-R200/SS-R100
21
Main
menu item Submenu item Function
Reference
UTILITY
MEMORY
FORMAT
Format USB, SD,
and CF media
Page 27
BRIGHTNESS
Display and
indicator
brightness
settings
Page 24
KEYBOARD
Keyboard type
setting
Page 73
CLOCK ADJUST Time setting Page 24
RS-232C RS-232C setting Page 75
RC-3F MODE
Footswitch mode
setting
Page 71
DIGITAL OUT
Digital output
settings
Page 71
INFORMATION
Show information
about the
operating time
and media
Page 72
FACTORY
PRESET
Restore the
factory settings
Page 72
CD
FINALIZE
Finalize and
unfinalize CD-R/
CD-RW disc
Page 43
ERASE
Erase a written
CD-RW disc
Page 69
BURN TO CD
Write from the
selected media
to a CD-R/CD-RW
disc
Page 64
RIP TO
MEMORY
Write from a CD
to the selected
media
Page 66
The PLAY OTHERS submenu items are as follows.
PLAY OTHERS
menu item
Function Reference
MONO MIX
Mono playback setting Page 36
EOM TRACK
EOM function setting Page 36
EOM MEDIA
EOM function setting Page 36
RESUME
Resume playback setting Page 37
POWER ON PLAY
Power-on play setting Page 37
LINK
Link playback setting Page 37
The RECORDING OTHERS submenu items are as follows.
REC OTHERS menu
item
Function Reference
PAUSE MODE Pause mode setting P.age 46
SRC
Sampling rate converter
setting
Page 41
WORD CLIP
Recording file name
setting
Page 47
COMP Compressor setting Page 47
DITHER Dither setting Page 48
Menu operation basics
You can perform the following operations in the menus.
To select an item (vertically on the screen):
Turn the MULTI JOG dial.
Use the cursor 5 and b buttons on the remote control.
To confirm the selected item:
Press the MULTI JOG dial.
Press the ENTER key on the remote control.
To move the cursor left/right:
Use the m [SKIP]/, [LOCK] buttons.
Use the cursor g/t buttons of the remote control.
To open a sub-screen not currently shown on the
display (, is shown at the right):
Press the MULTI JOG dial or , [LOCK] button.
Press the ENTER or t button of the remote control.
To go back one menu level:
Press the MENU [JOG] or m [SKIP] button.
Press the MENU or g button of the remote control.
To return directly to the Home Screen from menu
mode:
Press the HOME/DISPLAY button.
Press the HOME/DISP button on the remote control.
NOTE
If there are items above or below the currently displayed
items in the list, 5 and/or b will be shown at the top
and/or bottom of the list.
Menu operation procedures
This example explains sync recording setting.
NOTE
• The front panel illustrations shown below are of the
SS-CDR200 model. The SS-R200 and SS-R100 models
have different appearances.
• The display screens shown below are from the
SS-CDR200. The SS-R200 and SS-R100 display screens
are different in some cases.
1 Use the main unit or the included TASCAM RC-SS2
remote control to open the
MENU
screen.
Front panel operation:
Press the MENU [JOG] button.
Remote control operation:
Press the MENU button.
2 − Names and functions of parts