Teac SS-CDR200 - Manual (Page 23)

TASCAM SS-CDR200/SS-R200/SS-R100
23
3 − Preparations
Making connections
The following example shows connections with an SS-CDR200.
Precautions before making connections
• Before making connections, read the operation manuals of the other equipment carefully and connect each one
correctly.
• Turn OFF (or put in standby) the power of this unit and all other devices before connecting them.
• Connect all the devices to the same power supply line. When using a power strip, for example, use a thick cable with a
high current capacity to minimize variation in the power voltage.
Computer
RS-232C port
(COM port, etc.)
(SS-CDR200/SS-R200 only)
DIGITAL
OUT
(COAXIAL)
DIGITAL
IN
(COAXIAL)
Digital mixer,
digital recorder,
digital amplifier
ANALOG OUT
(BALANCED)
ANALOG IN
(BALANCED)
Mixer,
recorder,
amplifier, etc.
(SS-CDR200/
SS-R200 only)
Mixer,
recorder,
amplifier, etc.
(SS-CDR200/
SS-R200 only)
ANALOG
OUT
(UNBALANCED)
ANALOG
IN
(UNBALANCED)
Mixer,
recorder,
amplifier, etc.
External controller
(RC-SS20, etc.)
(SS-CDR200/SS-R200only)
TASCAM RC-SS2
Remote Control Unit
(Supplied)
TASCAM RC-3F
Foot Switch
(Sold separately)
TASCAM RC-20
Direct Play Remote
(Sold separately)
Headphones