Teac SS-CDR200 - Manual (Page 55)

TASCAM SS-CDR200/SS-R200/SS-R100
55
4 Press the MULTI JOG dial (or remote control ENTER
button) to confirm movement to the position.
-- MOVE --
and a progress bar appear in a pop-up
while the movement is completed.
After the file name has been moved, the
FINDER
screen reopens.
Move/copy files between folders
1 Select the file to be moved and copied, and turn
the MULTI JOG dial (or push remote control 5/b
buttons) to select
MOVE/COPY
.
2 Press the MULTI JOG dial (or remote control ENTER
button). The file to be moved or copied blinks on
the
FINDER
screen.
If you move the blinking file to where a folder
name is shown, it will disappear (because it will be
put in the folder) and the folder name will become
selected.
3 Use the MULTI JOG dial and m [SKIP] and,
[LOCK] buttons (or remote control 5/b/g and t
buttons ) to navigate the
FINDER
screen and open
the destination folder.
If you move the cursor to where a file name is
shown, the file moved will appear there blinking.
4 Turn the MULTI JOG dial (or push remote control
5 /b buttons) to move the blinking file to the
position where you want it.
Press the MULTI JOG dial (or remote control ENTER
button) to show the following menu items in a pop-
up.
5 Select
MOVE
if you just want to move the file from
its former location or
COPY
if you want to copy
the file, and press the MULTI JOG dial (or remote
control ENTER button).
-- MOVE --
or
-- COPY --
(as appropriate) and
a progress bar appear in a pop-up while the file is
moved and copied.
When set to MOVE
When set to COPY
NOTE
If you choose
COPY
, the original file will remain where it
was. If you choose
MOVE
, the original file will not remain.
6 − File and folder operations (FINDER screen)