Teac SX-1 Quick Start Guide - Manual (Page 22)

Chapter 4 –MIDI Basics
22
TASCAM SX-1 Quick Start Guide
2 Find the MIDI track whose output channel
you want to change.
3 Go to the
MIDI Port
select screen (the text in
this window should read something like,
A: MOut M1
). Choose the
Port
(SX-1 MIDI out-
put Port A, B, C, or D) where your sound
module is connected.
4
Next, go to the MIDI channel select menu
and choose the channel that corresponds to
the MIDI channel your sound module is set
to receive. In the VGA window, this is done
through a second pull-down menu which
extends from the
Port
's pull down menu.
And in the LCD window, this is done through
a separate menu at the bottom of the screen
(see the LCD display illustration above).
5 If you have followed these steps correctly,
your sound module should be receiving the
track's newly assigned MIDI channel.