Teac SX-1 Quick Start Guide - Manual (Page 18)

Chapter 3 –Making Connections
18
TASCAM SX-1 Quick Start Guide
Loading the Demo Song
The SX-1 ships with two demonstration songs: an
audio and a MIDI demonstration. If your monitors
are connected properly, you can load the song as
described here, press
PLAY
and you hear the song.
Note that when you load either of the demo songs,
the actual demo song does not load. What happens is
that the SX-1 automatically makes a copy of the song
and loads that copy instead (meaning that there is
always a “clean” demonstration song available). If
you want to keep the copy after you have worked on
it, unless you save it with another name (which does
not include “Demo” as part of the name!), it will be
overwritten next time you load the demo song.
TIP
For the following examples, if you are using an external
VGA, make sure the
MAIN DISPLAY key above the
LCD ACCESS section is set to (this
LED is lit).
Loading the Audio Demo Song
1 From the
MAIN DISPLAY MODES
section on
the SX-1's front panel, press
PROJECT
. The
Project
page will appear.
2 In the
MANAGE
project tab, on the currently
displayed screen, select the project titled
SX-1
Audio Demo
.