Teac SX-1 Quick Start Guide - Manual (Page 19)

Chapter 3 –Making Connections
TASCAM SX-1 Quick Start Guide
19
3 Press the
LOAD
button in that same window
and the SX-1 will load the currently selected
project, and then display the song's
Track
window.
4 Press
PLAY
to hear the song.
TIP
If you don't hear anything, make sure that the source
feeding your monitors is the stereo output. Look at the
CONTROL ROOM section and verify that the source
selected is stereo, as indicated by the illuminated
LED.