Turning on the data logger – Super Systems SDS 8120 User Manual
Page 94
Super Systems Inc.
Page 94 of 104
Color Touch Screen Data Logger Operations Manual
Red – Charging Green – Charged
Charging Indicator on Data Logger
Turning on the Data Logger
Move the data logger to the survey area.
Turn on the data logger by turning the switch located
on the side of the unit to the “ON” position.
Power Switch in “ON” Position
The data logger will turn on. The touch screen will start. After a few minutes, the main Color
SDS Touch Screen menu will appear. Ensure that there are no error messages on the screen
after one minute of operation.
Connecting the Thermocouple Wires and Setting the Input Type
Connect the thermocouple wires to the input boards on the data logger.
Connecting Thermocouple Wires to Input Board
Set the Input Type (thermocouple wire type) using the Edit Input Types menu.