Super Systems SDS 8120 - Manual (Page 92)

Super Systems Inc. Page 92 of 104
Color Touch Screen Data Logger Operations Manual
Appendix 1: Quick Start Guide
The purpose of this Quick Start Guide is to provide a step-by-step guide to using the Color SDS
Data Logger for the very first time. More specifically, this guide provides a procedure for
preparing and using the data logger in survey operations beginning with receipt of shipment and
concluding with downloading data with SDS Reporter after the survey has been run and
generating reports. This guide provides concise information on unpacking, setting up, and
operating the Color SDS Data Logger, as well as downloading data and generating a report; for
more detailed information, please refer to specific sections of the manual.
Unpacking the Color SDS Data Logger
When you receive the Color SDS Data Logger, it will arrive in a box similar to the one shown
below.
Typical Box in Which Color Touch Screen Data Logger is Shipped
When the shipment arrives, move the box to a sturdy, elevated location (such as a table that can
support the weight of the data logger) with a working electrical outlet nearby and sufficient
room in which to work. When moving the box, employ proper safety precautions in order to
avoid personal injury.
Once the box containing the data logger has been placed on a sturdy work surface, you may
begin removal of the data logger from the box. First, using a utility knife or other appropriate
cutting instrument, cut the tape on top of the box. Then turn the box on its side and pull the box
flaps back, ensuring that there is enough clearance on the work surface that the data logger
will fit, with minimal risk of falling.