Super Systems SDS 8120 - Manual (Page 36)

Super Systems Inc. Page 36 of 104
Color Touch Screen Data Logger Operations Manual
Figure 44 - Passcode Change Screen
Cold Junction Thermistor Calibration
Please refer to the Calibration section above for more details.
Full Data Action
Full Data Action allows you to configure the way in which the SDS software handles data logging
and data log files as the storage card nears its full capacity. This can happen as data log files
are continually added to the storage card, eventually leading to the card running out of storage
space. As shown in Figure 45, there are two choices in this menu: Automatic Deletion and Stop
Datalogging.
Automatic Deletion causes the SDS software to delete data log files (starting with the oldest)
automatically as the storage card nears its full capacity; it will not delete data log files that have
been written less than 30 days before the current system date and time. For this reason, it is
important that the system date and time be set correctly when this setting is used and the
storage card is nearing its full capacity. For more information on setting the system date and
time, refer to Changing the System Date and Time.
Stop Datalogging causes the SDS software to stop logging data to the storage card when the
storage card is nearing its full capacity. When this occurs, a message box will appear indicating
that data logging has stopped. Click OK to close the window. In order to resume data logging,
you will need to restart the Color SDS Data Logger. For more information on deleting data log
files, see the section on Datalog Deletion.