Super Systems SDS 8120 - Manual (Page 50)

Super Systems Inc. Page 50 of 104
Color Touch Screen Data Logger Operations Manual
Figure 64 - Manual entry on Load Survey Data form
NOTE: Most of the “Report Properties” tabs (Report, Furnace, Survey Box) will need to be filled
out manually as well.
The next tab is the Thermocouples tab (Figure 65). This tab contains the information about the
thermocouple settings and it also lists the active thermocouples. The information in the
thermocouple settings includes: the temperature type (F or C), the number of thermocouples,
the number of TCs used in the report, the thermocouple type, the thermocouple gauge, the
thermocouple spool number, whom the thermocouple was calibrated by, the date the
thermocouple was calibrated, and the thermocouple spool correction factor. Clicking on the
“Change” button will allow the user to change the spool correction (Figure 66).
Figure 65 - Report Properties Thermocouples Tab