Super Systems SDS 8120 - Manual (Page 17)

Super Systems Inc. Page 17 of 104
Color Touch Screen Data Logger Operations Manual
Figure 18 - Network Connection Properties
Once the Local Area Connection Properties screen is displayed, the Local Area Connection
Properties tab should be highlighted. Click on Internet Protocol (TCP/IP) and then click the
Properties button to display Internet Protocol (TCP/IP) Properties.
Figure 19 - Network Connection Dialog Boxes
In the Internet Protocol (TCP/IP) Properties window, you will need to select the option for Use
The Following IP Address. These settings should match the settings on the Color SDS Data
Logger.
To change the network settings on your computer you may need additional information. If
needed, please refer to the computer manual.
Connecting the SDS Data Logger to a Local Computer via USB
The data logger can be connected directly to a local computer using a USB cable and SDS
Reporter. Windows uses special software to transfer files and information between the data
logger and the local computer when connected via USB. If you are using Windows XP, this
software is called ActiveSync. If you are using Windows Vista or Windows 7, the software is
called Mobile Device Center. If the required software was not installed prior to installing
SDSReporter, the SDSReporter Setup utility (run from setup.exe) would have installed the
required software.