Exit program, Configuration, Exit program configuration – Super Systems SDS 8120 User Manual
Page 37: Figure 45
Super Systems Inc.
Page 37 of 104
Color Touch Screen Data Logger Operations Manual
Figure 45 - Full Data Action options
Exit Program
Selecting this option allows you to exit the Color SDS Touch Screen program. A confirmation box will
appear when you select this option (Figure 46). There are very few situations where this action would
need to be performed.
Figure 46 - Shut Down Interface confirmation
Configuration
The Configuration Menu contains the following items:
• Communications Setup. This menu item allows you to change the COM port
number, address, and baud rate of the communications port used to connect the
touch screen interface to the SDS mainboard.
• Compact Database. When clicked, Compact Database optimizes and reduces the
size of the database contained on the storage card.
• Read/Write Data. Using this feature, you can view the raw data on the underlying
hardware and also write data to the underlying hardware. This feature should not
be used in most circumstances.
• About. This option simply shows the About screen for Super Systems SDS, as
shown in
• Shut Down Software. This option shuts down the SDS touch screen.
• Set Serial Number. This feature allows you to change the serial number of the
touch screen software. This setting should not be changed.
• Degree Type. This feature allows you to change the unit of measurement used for
temperature—degrees Fahrenheit or degrees Celsius.
• Product Type. This feature allows you to change the SDS product type as it is
known to the touch screen software.