Super Systems SDS 8120 - Manual (Page 34)

Super Systems Inc. Page 34 of 104
Color Touch Screen Data Logger Operations Manual
Figure 42 - CJ Trim Screen
Cold Junction Thermistor Calibration
This procedure is performed by Super Systems Inc. before the SDS Data Logger is
shipped. In most cases, the procedure will not need to be performed in the field. If a
situation should arise where a cold junction calibration may need to be performed in the
field, please contact Super Systems Inc. Technical Support at 800-666-4330.
Datalog Deletion
The Color SDS Data Logger includes an option to delete log data files and survey data
files. This option is useful when these data files are no longer needed or when removing
them would free up space on a storage card nearing its full capacity. The Datalog
Deletion screen (Figure 43) allows you to change the date and time range of the files
that will be deleted (Start Date and End Date). The Delete Log Data button will cause
only the log data files to be removed, while the Delete Survey and Log Data button will
delete both the survey data and log data files.