User maintenance – Seaward Supernova Elite User Manual
Page 90
User Maintenance
80
User Maintenance
The Tester is a rugged quality instrument. However, care should
always be taken when using, transporting and storing this type of
equipment. Failure to treat the product with care will reduce both the
life of the instrument and its reliability.
If the Tester is subject to condensation, allow the Tester to
completely dry before use.
• Always check the Tester and all test leads for signs of damage
and wear before use.
• Do not open the Tester under any circumstances.
• Keep the instrument clean and dry.
• Avoid testing in conditions of high electrostatic or electromagnetic
fields.
• Maintenance should only be performed by authorised personnel.
• There are no user replaceable parts in the Tester.
• The unit should be regularly calibrated (at least annually).
• For repair or calibration return the instrument to Seaward at:-
Seaward Electronic Limited.
Bracken
Hill
South West Industrial Estate
Peterlee
Co.
Durham
SR8
2SW
Tel : +44 (0)191 586 3511
Fax: +44 (0)191 586 0227
User Maintenance