Seaward Supernova Elite - Manual (Page 51)

How to view Test Results
41
If you need to change the current Location use the cursor keys to
highlight LOCATION and press Enter to change the Location name
Use the cursor keys to highlight a Location name and press Enter to
select the desired option.
Note
Default settings for Sites and Test Sequences are pre-loaded
into the Tester. See ‘How to use Setup’ to change these
settings.
Re –Test Period
Use the cursor keys to select RE-TEST PERIOD and then press the
ENTER key to choose a re-test period.
----RE-TEST PERIOD----
NOT REQUIRED
1 MONTH
3 MONTHS
6 MONTHS
12 MONTHS
24 MONHTS
48 MONTHS
OTHER...
Complete the rest of ENTER APPLIANCE DETAILS as normal (refer
to your Tester Manual) and move on to the next stage in the test
process.
Note for PATGuard Plus Users
Re-test periods are downloaded with test results and are compared
with re-test periods of existing Assets on PATGuard Plus or used as
the re-test period for new Assets. This is to ensure that re-test
periods are ‘synchronized’ across the PAT system.
--SELECT LOCATION--
WORKSHOP
LOC. 2
LOC. 3
How to view Test Results