Seaward Supernova Elite - Manual (Page 33)

How to perform Automatic Tests
23
Use Testcodes
This option bypasses the need to edit a specific test sequence,
allowing direct entry of a Testcode through the keyboard or a barcode
scanner.
Use the cursor keys to highlight the Testcode to be changed. Press
Enter to select that digit. Use the keyboard to change the value of
the digit. Press Enter to confirm the change. Press the Red button to
abort changes to the selected Testcode.
Use a barcode scanner to enter a Testcode
Use the cursor keys to highlight the PERFORM TEST option and
press Enter to commence the test sequence.
Press the Red button to return to the previous menu.
Perform Test
Use the cursor keys to highlight the Perform Test option and press
Enter to perform the test. Pressing the Red Button will return to the
previous menu.
The screen will change to the Meter Display (see separate section -
How to use the Meter Display for an explanation).
---------------ENTER TESTCODES-------------------------
OUTPUT LIMIT DUR NUM
SOCKET 230V
VISUAL YES 1
EARTH BOND 4A 0.10 Ω 5 1
INSULATION 500V 0.50M Ω 5 1
SUB LEAKAGE SKIP
FLASH SKIP
LEAKAGE SKIP
TOUCH LEAKAGE SKIP
POLARITY SKIP
RCD SKIP
TESTCODE
1: I2F8008032
TESTCODE 2: R222111111
PERFORM TEST
How to perform Automatic Tests