Seaward Supernova Elite - Manual (Page 70)

How to print Barcode Labels and Testcodes
60
Beep on Barcodes
Use the cursor keys to highlight the option and press Enter to select
the desired option.
This option will cause a beep whenever a barcode has been
received.
Beep on Warning
Use the cursor keys to highlight the option and press Enter to select
the desired option.
This option will cause a beep whenever a warning message is
displayed or a test fails.
Saving User Settings
In the EDIT USER SETTINGS, highlight OK and press the Enter
button or select the OK Fast key. The user settings will then be
saved.
Edit Site List
-----EDIT SITE LIST-----
WORKSHOP
SITE 2
SITE 3
SITE 4
SITE 5
Use the cursor keys to highlight a Site name and press Enter to
select the desired option.
--EDIT SITE NAME--
SITE 4
Note
If you change the name of the Site during testing all of the
previous tests will still be referenced to the old Site name,
this gives unlimited amounts of Sites within the test results
memory.
How to print Barcode Labels and Testcodes