Seaward Supernova Elite - Manual (Page 63)

How to print Barcode Labels and Testcodes
53
How to print Barcode Labels and Testcodes
The Supernova Elite is capable of printing barcode labels in
conjunction with a compatible thermal printer (see chapter 6).
To Print Barcode Pass/Fail Labels
To print barcode pass/fail labels it is necessary to carry out an actual
test (see how to perform automatic tests). After a test is complete
and the results stored in memory it is possible to download results to
a thermal printer (see how to download results) and print pass/fail
labels.
To print barcode testcodes
To print barcode test codes select SETUP from the Main Menu and
select EDIT TEST SETTINGS from the SETUP menu. From the
SELECT TEST SETTINGS menu chose the desired test e.g. 230V
HH / PORT 1. Attach the compatible printer to the port and from the
TEST SETTINGS EDITOR highlight the PRINT TESTCODE option
and press enter.
Note
The restrictions of paper width means that appliance numbers
representing more than 12 characters cannot be printed and a
numbered label will print instead. Testcodes are accommodated
since these are displayed as two lines of 10 characters.
How to print Barcode Labels and Testcodes