Seaward Supernova Elite - Manual (Page 58)

How to view Test Results
48
TRANSFER PRINTER
This option can only be used with the Seaward Test ‘N’ Tag System
(308A910). Full details of this option can be found in the manual
supplied with every Test ‘N’ Tag System.
Output Connection
Selects the tester output connection to which the results are to be
sent, available options are:
RS232
This sends the data to the RS232 serial port (9 way D connection on
the tester) for connection using a compatible serial cable. Select this
option for downloading to PAT software.
Parallel
This sends the data to the Parallel port.
Baud Rate
If available this option selects the Baud Rate at which the data is
sent, possible values are 9600, 19200 or 28800. Leave default set to
9600 for downloading to PAT software.
Download Format
This field shows the format choices available depending upon the
destination selected.
For downloading to a PC the user has the option of sending data in a
PATS+ format, compatible with Seaward PATS+ software, SSS
format - Seaward Super String, compatible with Seaward PAT
software, Certificate - downloads results in non-ASCII certificate
format, Summary - downloads a summary of results.
In PATS+ format the user has the option to download site (send site
name with each test result) or to download user (send user name
with each test result). This will be truncated to 10 characters as it
appears to the software as a Usercode.
How to view Test Results