Scotsman C2648 - Manual (Page 4)

C2648 Prodigy and Prodigy Plus Service Manual
January 2015
Page 4
Model Number Description
Example
• C2648SR-3D
• C=cuber
• 24=nominal capacity in 100s of pounds
• 48=nominal width of cabinet in inches
• S=cube size, S=small or half dice,
• M=medium or full dice
• R=condenser type. R=Remote
• -3=Electrical code. = 208-230/60/3
• D=series revision code.
Note: In some areas of this manual model
numbers may include only the first five characters
of the model number, meaning that cube size,
condenser type and voltage differences are not
critical to the information listed there.
Options:
There are several options available for field
installation. They include:
• Vari-Smart Adjustable ice level system
• Smart-Board Advanced feature control
Some installations require bin or dispenser adapters.
See the table below.
Standard bin applications – Adapter information
Model BH1100, BH1300 or BH1600
C2648 Adapter panels included with bin, no
adapter needed
Other bins and applications:
Take note of the depth of the machine. Slope front
bins may not be deep enough to allow the bin door
to rest open against the machine. Upright bins are
recommended.
Note the drop zone and optional ultrasonic sensor
locations in the illustrations. Drop zone hole must be
20.25” deep.
Scotsman ice systems are designed and
manufactured with the highest regard for safety and
performance. They meet or exceed the standards of
UL and NSF.
Scotsman assumes no liability of responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the use
of any part and/or other components not specifically
approved by Scotsman.
Scotsman reserves the right to make design changes
and/or improvements at any time. Specifications and
design are subject to change without notice.