Scotsman C2648 - Manual (Page 18)

C2648 Prodigy and Prodigy Plus Service Manual
January 2015
Page 18
Use and Operation
Once started, the ice machine will automatically
make ice until the bin or dispenser is full of ice. When
ice level drops, the ice machine will resume making
ice. There are four indicator lights at the front of the
machine that provide information on the condition of
the machine.
External Indicator Lights:
• Power
• Status
• Water
• Clean
Indicator Lights & Their Meanings
Power
Status Water De-Scale & Sanitize
Steady Green Normal Normal – bin full or
making ice
- -
Blinking Green Self Test Failure Switching on or off - -
Blinking Red - Diagnostic
shutdown or,
if making ice,
temperature sensor
failure
Lack of water -
Yellow - - - Time to de-scale
and sanitize
Blinking Yellow - - - In Cleaning mode
Light off No power Switched off Normal Normal
If the Water light is on, the machine has sensed a
lack of water. Check the water supply to the machine.
The water may have been shut off or the water filter
cartridges need to be changed.
If the Clean light is on, the machine has determined
that it may need to be cleaned. Contact an authorized
Scotsman service agent and have the machine
cleaned, de-scaled and sanitized.
Other Indicators
Removal of the front panel allows review of the Code
Display and Component Indicator Lights.
Note: A Component Indicator Light switches ON
to indicate that the component is operating.
Note: There are three Curtain Switch lights, SW1,
SW2 and the Period in the display code. A curtain
switch light is ON when a curtain is either open or not
present.