Scotsman Prodigy Series User Manual
Page 96
January 2015 Page 96
Repair Section
Controller
1. Disconnect electrical power.
2. Remove front panel.
3. Open control box door.
4. Unplug all wires from controller.
5. Remove screws holding controller to door
6. Push controller snaps down and pull controller
from mounting bracket.
7. Before touching new controller, discharge any
static electricity by touching the metal surface of
the ice machine cabinet.
8. Rotate selector switch to the proper model
number for the machine the controller is being
installed on.
9. Install new controller on mounting bracket,
secure with original screws.
10. Attach all wires removed.
11. Shut control box cover.
12. Switch on the electrical power.
Controller’s Model Selector Switch
Electrical Shock Hazard
Disconnect electrical
power before beginning