Scotsman Prodigy Series - Manual (Page 38)

January 2015 Page 38
Cleaning - A, B or C Series
All models have an indicator light that switches on to
inform the user that the cleaning interval has been
reached. It does not stop the machine from making
ice.
All models have a Clean mode. In the A, B or C series
machines, it is a two-step, user timed system.
After readying the machine for cleaning, the first
push of the Clean button drains the reservoir and
refills it. The cleaning process is designed to use
straight nickel safe ice machine scale remover, added
between draining and refilling. After the scale remover
has been added, the person cleaning the machine is
in control of how long to circulate the scale remover.
It is important that the Sump Empty light switch on
during this part of cleaning, if it does not the inlet
water valve will not add water and the scale remover
cannot circulate. If this occurs, push off, un-snap the
Water Level Sensor and lift slightly, then push Clean
again.
A second push of the Clean button starts the flush out
process. This drains and refills the reservoir until the
person cleaning the machine pushes the Off button.
This process should last at least 20 minutes to fully
flush out the scale remover and loose scale.
it is the second push of the Clean button that clears
the Cleaning Reminder Light
After the scale remover has been drained out, the
water distributor must be inspected for loose scale
and cleaned of any. Removal of the sump cover,
pump bracket and curtain is next to be sure those
parts have been cleaned.
Cycle power to the controller as a final step before
restarting ice making.