Denon AVR-4306 - Manual (Page 94)

Page Default settings Speaker Setup
Page Default settings Auto Setup / Room EQ
89
Advanced Setup – Part 2 Advanced Setup – Part 2
1. Auto Setup/Room EQ
1 Auto Setup
Room EQ Setup 2
Direct Mode
Setup
4
Set the ON/OFF setting of Room EQ, in the case of the surround mode
is in “Direct” or “Pure Direct”.
3
Mic Input Select
Set this to switch the Mic Input jack for use for Mic or V.AUX L-channel
input terminal.
This unit performs an analysis of the speaker system and measures the
acoustic characteristics of your room to permit an appropriate automatic
setting.
Set the Room EQ setting with All or Assign for each surround mode.
–
All, Room EQ = OFF
OFF
Mic
9~13
87
87
87
System setup items and default values (set upon shipment from the factory)
2. Speaker Setup
1
3
Speaker
Configuration
Channel Level
Input the combination of speakers in your system and their corresponding
sizes (SMALL for regular speakers, LARGE for full-size, full-range) to
automatically set the composition of the signals output from the speakers
and the frequency response.
This adjusts the volume of the signals output from the speakers and
subwoofer for the different channels in order to obtain optimum effects.
Front Sp.
Large
Center Sp.
Surround Sp.
A / B
Subwoofer
Small Small Yes
Front
L & R
Center
Surround
L & R (A)
Subwoofer
12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m) 12 ft (3.6 m)
Front L Front R Center
Surround
R
Subwoofer
0 dB 0 dB 0 dB 0 dB 0 dB
Surround Back
Sp.
Small / 2spkrs
4
Distance
This parameter is for optimizing the timing with which the audio signals
are produced from the speakers and subwoofer according to the listening
position. Surround
L & R (B)
10 ft (3.0 m)
Surround
L
0 dB
Crossover
Frequency Set the frequency (Hz) below which the bass sound of the various
speakers is to be output from the subwoofer.
5 80 Hz
82
2
Subwoofer
Setup
This selects the subwoofer for playing deep bass signals. LFE 83
83, 84
84, 85
85, 86
Surround
Speaker Setup
Use this function when using multiple surround speaker
combinations for more ideal surround sound. Once the
combinations of surround speakers to be used for the
different surround modes are preset, the surround speakers
are selected automatically according to the surround mode. Surround
mode
Surround
speaker
DOLBY/
DTS CINEMA
DOLBY/
DTS MUSIC
WIDE
SCREEN
7 CH
STEREO
DSP
SIMULATION
MULTI CH
MODE
A A A A A A A
6
DOLBY
GAME
86
Surround
Back
10 ft (3.0 m)
Surround
Back R
0 dB
Surround
Back L
0 dB