Denon AVR-4306 - Manual (Page 40)

35
Basic Operation Basic Operation
DTS NEO:6 mode
Surround playback can be performed for the analog input and
digital input 2-channel signals.
1 Press the STANDARD button to select “DTS
NEO:6” mode.
3
Press the SURROUND PARAMETER button.
• The surround parameter menu is displayed.
2
Play a program source.
4
Press the CURSOR F F or G G button to select the
play mode.
The mode switches as shown below each time the
STANDARD button is pressed.
DTS NEO:6 DOLBY PL II x
5 Press the CURSOR D D or H H button to select the
various surround parameters.
6 Press the CURSOR F F or G G button to adjust the
parameters setting.
7 Press the ENTER or SURROUND PARAMETER
button to complete the setting.
• When “Default” is selected and the CURSOR F F button is
pressed, “MODE” and “TONE” are automatically reset to the
default values and “CINEMA EQ.” is set to “OFF”.
• When playing PCM digital signals or analog signals in the
DOLBY PRO LOGIC II , DOLBY PRO LOGIC II x, DTS NEO:6
modes and the input signal switches to a digital signal encoded
in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal,
the mode automatically switches to DTS surround.
2 Surround parameters e
DTS NEO:6 Mode:
• Cinema:
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as with
6.1-channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and the
reversed phase component to the surround (SL, SR and SB
channels).
• Music:
This mode is suited mainly for playing music. The front channel
(FL and FR) signals bypass the decoder and are played directly
so there is no loss of sound quality, and the effect of the
surround signals output from the center (C) and surround (SL,
SR and SB) channels add a natural sense of expansion to the
sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been
added.
CURSOR USER MODE
STANDARD ENTER
SURROUND PARAMETER
ENTER
USER MODE
CURSOR
SURROUND
PARAMETER
STANDARD