Denon AVR-4306 - Manual (Page 36)

31
Basic Operation Basic Operation
NIGHT CURSOR
STANDARD ENTER
SURROUND PARAMETER
Dolby Digital mode and DTS Surround (only
with digital input)
2 Play a program source with the
, mark.
• The Dolby Digital indicator lights when
playing Dolby Digital sources.
• The DTS indicator lights when playing DTS
sources.
lights
lights
lights
3
Press the SURROUND PARAMETER button.
• The surround parameter menu is displayed.
4 Press the CURSOR D D or H H button to select the
parameter.
5 Press the CURSOR F F or G G button to select the
setting.
6 Press the ENTER or SURROUND PARAMETER
button to complete the setting.
1 Press the STANDARD button to select
“STANDARD (Dolby/DTS Surround)” mode.
• When “Default” is selected and the CURSOR F F button is
pressed, “CINEMA EQ.” and “D.COMP.” are automatically
turned off, “LFE” is reset, and “TONE” is set to the default
value.
ENTER
CURSOR
NIGHT
SURROUND
PARAMETER ON SCREEN
STANDARD
2 Dialogue Normalization
The dialogue normalization function is activated automatically
when playing Dolby Digital program sources.
Dialogue normalization is a basic function of Dolby Digital which
automatically normalizes the dialog level (standard level) of the
signals which are recorded at different levels for different
program sources, such as DVD, DTV and other future formats
that will use Dolby Digital.
When this function is activated, the following message appears
on the main unit’s display:
Display
O f f s e t - 4 d B
D i a l . N o r m
The number indicates the normalization level when the currently
playing program is normalized to the standard level.
• Canceling night mode:
Press the NIGHT button again.
• The night mode only works when playing program sources
recorded in Dolby Digital.
• When the night mode is set to “ON”, the “D.COMP” surround
parameter can not be selected.
When listening at night or at lower volumes, the night mode
improves listenability.
Press the NIGHT button to enter the night mode.
• The NIGHT indicator lights.
Night mode
Set to “1spkr” Set to “2spkrs”
lights
The surround back channel can be switched on and off from
the surround parameter menu.
When the surround back channel is set to “ON”, the
surround back channel’s output display lights.