Denon AVR-4306 - Manual (Page 42)

37
Basic Operation Basic Operation
CURSOR
DSP SIMULATION ENTER
SURROUND PARAMETER
3
5
4
• The “7CH STEREO” display changes as shown below
according to the surround back speaker setting.
• When “Default” is selected and the CURSOR F F button is
pressed, “CINEMA EQ.” and “D.COMP.” are automatically
turned off, “ROOM SIZE” is set to “medium”, “EFFECT
LEVEL” to “10”, “DELAY TIME” to “30 ms” and “LFE” to “0
dB”.
• The “ROOM SIZE” expresses the expansion effect for the
different surround modes in terms of the size of the sound
field, not the actual size of the listening room.
Press the CURSOR D D or H H button to select the
various surround parameters.
Press the ENTER or SURROUND PARAMETER
button to complete the setting.
Press the CURSOR F F or G G button to adjust the
parameter settings.
DSP surround simulation
1
2
Press the SURROUND PARAMETER button.
• The surround parameter menu is displayed.
The surround mode switches in the following order each
time the DSP SIMULATION button is pressed:
The screen for the selected surround mode appears.
Press the DSP SIMULATION button to select the
surround mode for the input channel.
7CH STEREO WIDE SCREEN SUPER STADIUM
JAZZ CLUB
ROCK ARENA
MATRIX
VIDEO GAME CLASSIC CONCERT MONO MOVIE
VIRTUAL
DISPLAY
SURROUND
BACK SPEAKER
ON
OFF
7CH STEREO
5CH STEREO
ENTER
7CH STEREO
CURSOR
SURROUND
PARAMETER
DSP SIMULATION
The 7CH STEREO mode can be selected directly by
pressing the 7CH STEREO button on the remote control unit.